PowerGen 600, 1200, 1800
PowerGen 600, 1200, 1800
Featuring the same small footprint and highly efficient design, our PowerGen 600, 1200, and 1800 models are lower power versions of the industry standard PowerGen 5650.
QB80 Engine Specifications
Engine Model
QB80
Engine Type
Stirling Engine
Engine Architecture
Free Piston (frictionless)
Service
None
Weight
242 lbs
Length
33.10 in
Diameter
14.45 in
Charging Gas
Inert Helium
Electrical System
| System Output Power | Up to 5650W* |
| Power Max Gage Wire Interface | 6-20 AWG |
| Cable Gland Input | 3/4” Std |
| Ignition Standby Battery (Standard) | Sealed AGM Deep Cycle, 12V DC 40 Ah |
| Battery Capacity (Optional: for Increased Standby) | Up to 160 Ah |
| Safety | E-stop (normally closed) |
Cooling System
| Cooling System Type | High Efficiency Closed Loop |
| Cooling Fan Type | PWM Fan (qty. 2) |
| Max Coolant Volume | 4.2 gal (antifreeze) |
Fuel System
| Fuel Type | Dry Natural Gas, Propane, Butane, andother gaseous fuels** |
| Burner | Pre-mix |
| Ignition | Direct |
| Gas Regulator | 2-Stage |
| Gas Pressure Monitor | Transducer |
| Fuel Port | 1/2” NPT Male |
Communication
| Ethernet | RJ45 |
| Protocol | Modbus TCP/IP |
| Remote Data Viewer | Qnergy Dashboard |
| Discrete I/O’s | Configurable |
| Inputs (Dry Contact) | x6 (16-20 AWG) |
| Outputs (Relay) | x8 (16-20 AWG) (Max 250 V / 1 A) |
*output depends on configuration
**contact us regarding using any non-standard gaseous fuels (C1-C4)
